High Energy Density, Long Operating Time
Energy density is how much energy the battery contains when compared with its volume, a battery with a higher energy density will have a longer run time.
There is no doubt energy density of lithium polymer battery is the most outstanding among all kinds of rechargeable batteries, this makes lipo battery more desirable for use in compact electronic devices.
With more energy, we can fit the battery in a smaller space, this enables long-lasting time of phones, laptops, handheld terminals or medical devices etc.
Besides high-density, lipo battery is lightweight, none-memory effect, low rate of self-discharge, dimension and capacity can be customized to match clients’ devices.
These advantages set lithium polymer battery stand out from other types of batteries, it’s popular by various electronic device manufacturers.
Motoma Power starts lipo battery business since 2009:
Product Specification
| Battery model | 3.7V LIP105363 5000mAh |
| Nominal voltage | 3.7V |
| Nominal capacity | 5000mAh |
| Minimum capacity | 5000mAh |
| Charging voltage | 4.2V |
| Standard charging current | 1000mA (0.2C) |
| End current | 50mA (0.01C) |
| Max. charging current | 2500mA (0.5C) |
| Standard discharging current | 1000mA (0.2C) |
| Max. discharging current | 5000mA (1C) |
| End voltage of discharge | 3.0V |
| Dimension of cell | 10*53*63mm |
| Charging temperature range | 0~45℃ |
| Discharging temperature range | -20~60℃ |
| Connector | Molex, JST, Hirose etc |
| Protection Circuit Module (PCM) | Overcharge protect, over-discharge protect, over current protect, short-circuit protect |
| Cycle life | ≥80% capacity after 500 times standard cycles |
| Warantty life | 12 months |
Certificates
UN38.3, MSDS, IEC62133-2:2017, CB, CQC, KC, BIS, KSE, UL, Reach, RoHS etc.
