12.8V100Ah LiFePO4 Battery Pack for Solar Energy System UPS Backup
| Battery model number | M47 |
| Nominal voltage | 12.8V |
| Nominal capacity | 100Ah |
| Power capacity (Wh) | 1.28kWh |
| Operating volt. range | 10V-14.6V |
| Max. charging current | 100A |
| Max. discharging current | 100A |
| Dimension (L x W x H) | 330*172*215mm |
| Unit weight | 12Kg |
| IP Level | IP67 |
| Cycle life | 4000times |
| Terminal Type | F23 |
| Charging temperature range | 0~45℃ |
| Discharging temperature range | -20~60℃ |
Feature:
- Easy to replace lead acid battery
- Automotive grade lithium battery cell and High reliability tested BMS.
- With BMS intelligent communication more safe
- Support battery in series ( 4 pcs maximum 51.2v )
Not support battery in parallel . - Small size, light weight
- Long cycle life
- Low self-discharge batteries
- With BMS intelligent communication
- No memory effect batteries
- Low temperature charging cut-off protection.
- Cells and Packs are all UL Listed.
- Automotive grade laser welding process for cell bus bar.
- With CE/UL/MSDS certificate
- Design for disassembly cover with replaceable BMS and cells.
- Environment-friendly batteries
Advantage:
-
Grade A Cell
100amp hour lifepo4 battery uses the best grade A cells so your battery lasts longer and performs better.
All cells are fully listed and meet the UL1642 standards.
-
Certification
The 12v 100ah lithium-ion battery pack are certified with ISO9001/UL/CE/UN38.3.
-
Battery Pack Technology
1. The battery uses practical-grade case made of ABS material which is hard and non-flammable.
2. Adopting laser welding process of automotive-grade power battery for cell busbar, with characteristics of energy concentration,highwelding efficiency, large welding seam aspect ratio, and welding High strength, small heat input, small heat affected area etc.
3. Adopting advanced fixing plate and bolt technology to ensure the stability of the battery.
-
Long Runtime
MOTOMA 12 Volt 100Ah LiFePO4 battery has a minimum of 4000 cycles time, and the design life is up to 10 years. Widely UsedOur 12 Volt
100ah lithium LiFePO4 battery can handle just about any deep cycle applications, such as RV, Motorhome, Marine, Camping, Off-grid Solar
System, Home Solar System, UPS, Backup etc.
-
NOTE
This model can be connected with up to 4 batteries in Series (Max. 51.2V), Parallel connected not allowed.
Energy density is how much energy the battery contains when compared with its volume, a battery with a higher energy density will have a longer run time.
There is no doubt energy density of lithium polymer battery is the most outstanding among all kinds of rechargeable batteries, this makes lipo battery more desirable for use in compact electronic devices.
With more energy, we can fit the battery in a smaller space, this enables long-lasting time of phones, laptops, handheld terminals or medical devices etc.
Besides high-density, lipo battery is lightweight, none-memory effect, low rate of self-discharge, dimension and capacity can be customized to match clients’ devices.
These advantages set lithium polymer battery stand out from other types of batteries, it’s popular by various electronic device manufacturers.
Motoma Power starts lipo battery business since 2009:
Product Specification
| Battery model | 3.7V LIP105363 5000mAh |
| Nominal voltage | 3.7V |
| Nominal capacity | 5000mAh |
| Minimum capacity | 5000mAh |
| Charging voltage | 4.2V |
| Standard charging current | 1000mA (0.2C) |
| End current | 50mA (0.01C) |
| Max. charging current | 2500mA (0.5C) |
| Standard discharging current | 1000mA (0.2C) |
| Max. discharging current | 5000mA (1C) |
| End voltage of discharge | 3.0V |
| Dimension of cell | 10*53*63mm |
| Charging temperature range | 0~45℃ |
| Discharging temperature range | -20~60℃ |
| Connector | Molex, JST, Hirose etc |
| Protection Circuit Module (PCM) | Overcharge protect, over-discharge protect, over current protect, short-circuit protect |
| Cycle life | ≥80% capacity after 500 times standard cycles |
| Warantty life | 12 months |
Typical applications
Infusion Monitor, POS, printer, handheld terminals, tracking device, GPS, smart home, medical tablet, emergency light etc.
Certificates
UN38.3, MSDS, IEC62133-2:2017, CB, CQC, KC, BIS, KSE, UL, Reach, RoHS etc.
]]>Energy density is how much energy the battery contains when compared with its volume, a battery with a higher energy density will have a longer run time.
There is no doubt energy density of lithium polymer battery is the most outstanding among all kinds of rechargeable batteries, this makes lipo battery more desirable for use in compact electronic devices.
With more energy, we can fit the battery in a smaller space, this enables long-lasting time of phones, laptops, handheld terminals or medical devices etc.
Besides high-density, lipo battery is lightweight, none-memory effect, low rate of self-discharge, dimension and capacity can be customized to match clients’ devices.
These advantages set lithium polymer battery stand out from other types of batteries, it’s popular by various electronic device manufacturers.
Motoma Power starts lipo battery business since 2009:
Product Specification
| Battery model | 3.7V LIP4867114 5000mAh |
| Nominal voltage | 3.7V |
| Nominal capacity | 5000mAh |
| Minimum capacity | 5000mAh |
| Charging voltage | 4.2V |
| Standard charging current | 1000mA (0.2C) |
| End current | 50mA (0.01C) |
| Max. charging current | 2500mA (0.5C) |
| Standard discharging current | 1000mA (0.2C) |
| Max. discharging current | 5000mA (1C) |
| End voltage of discharge | 3.0V |
| Dimension of cell | 4.8*67*114mm |
| Charging temperature range | 0~45℃ |
| Discharging temperature range | -20~60℃ |
| Connector | Molex, JST, Hirose etc |
| Protection Circuit Module (PCM) | Overcharge protect, over-discharge protect, over current protect, short-circuit protect |
| Cycle life | ≥80% capacity after 500 times standard cycles |
| Warantty life | 12 months |
Typical applications
Infusion Monitor, POS, printer, handheld terminals, tracking device, GPS, smart home, medical tablet, emergency light etc.
Certificates
UN38.3, MSDS, IEC62133-2:2017, CB, CQC, KC, BIS, KSE, UL, Reach, RoHS etc.
]]>What’s high voltage lithium polymer battery?
With the increasing demand for Lithium batteries in electrical devices, the expectation for energy density of Lithium batteries is also increasing
High Voltage lipo batery (LiHV) offers higher energy density than regular LiPo battery, allowing your device to have a longer duration time, so clients always choose LiHV battery especially when requesting a bigger battery capacity but their device space is limited.
Motoma LiHV lipo battery packs
Motoma provides reliable high voltage lipo battery solutions, which include 3.8V LiHV, 3.85V LiHV and 3.88V LiHV
Motoma LiHV batteries are used widely in the market, it’s one of our mature battery solution.
Advantages include:
- Safe even the voltage is higher
- High energy density, longer duration
- Stable discharging platform
- Ensure at least 80% capacity after 500 times standard cycles.
- Good consistency of battery cell
- Customized service: 3.8V LIP904261 3000mAh is just a reference part number of our LiHV, we can customize capacity and dimension based on clients’ technical requirement, PCM and connectors can also be customized.
- Parallel or series several battery cells is acceptable.
Caution
Before you use the HVLi batteries, please check the charger at first as not each existing charger can charge HVLi batteries, for more details please contact Motoma team.
Product Specification
| Battery model | 3.8V LIP904261 3000mAh |
| Nominal voltage | 3.8V |
| Nominal capacity | 3000mAh |
| Minimum capacity | 3000mAh |
| Charging voltage | 4.35V |
| Standard charging current | 600mA (0.2C) |
| End current | 30mA (0.01C) |
| Max. charging current | 1500mA (0.5C) |
| Standard discharging current | 1600mA (0.2C) |
| Max. discharging current | 3000mA (1C) |
| End voltage of discharge | 3.0V |
| Dimension of cell | 9.0*42*61mm |
| Charging temperature range | 0~45℃ |
| Discharging temperature range | -20~60℃ |
| Protection Circuit Module (PCM) | Overcharge protect,over-discharge protect,short-circuit protect, over current protect |
Typical applications
Breast pump, heart monitor, smart phone, smart ring, IOT, GPS, handheld terminals, asset tracker, fitness tracker, sleep tracker etc
Heat is the worst enemy of batteries:
- Some materials in lipo battery such as separators and electrolytes have low melting and boiling points.
- Negative chemical reactions occur inside the battery in high tempearture.
- Charging and discharging at high temperature leads to gas generation that might cause a cylindrical cell to vent and a pouch cell to swell, so reduce battery safety and battery life.Considering above, battery manufacturers always set strict temperature protect in PCM to aviod any safety risk.
Regular lipo battery can meet most applications, the tempearture range is as below:
- Charging tempearture: 0~45 centigrade.
- Discharging tempearture: -20~60 centigrade.
However, some special applications such as vehicle GPS, vehicle camera face high temperature environment, it’s higher than 60 centigrade in the vehicle in summer, then need the high temperature battery solution.
Motoma High Temperature Battery
Motoma develops reliable high temperature battery via using special raw material such as high temperature electrolyte, the battery can be stored in 85 centigrade for 4 hours without any battery damage.
Caution
It’s not good for lipo battery if always work in high temperatue environment, so any high temperature applications still need to be carefully handled, for details please contact Motoma team via [email protected].
Product Specification
| Battery model | 7.4V LIP554158 1500mAh |
| Nominal voltage | 7.4V |
| Nominal capacity | 1500mAh |
| Minimum capacity | 1500mAh |
| Charging voltage | 8.4V |
| Standard charging current | 300mA (0.2C) |
| End current | 15mA (0.01C) |
| Max. charging current | 750mA (0.5C) |
| Standard discharging current | 300mA (0.2C) |
| Max. discharging current | 1500mA (1C) |
| End voltage of discharge | 6.0V |
| Dimension of cell | 5.5*41*58mm |
| Charging temperature range | 0~45℃ |
| Discharging temperature range | -20~85℃ |
| Connector | Molex, JST connectors etc |
| Protection Circuit Module (PCM) | Overcharge protect,over-discharge protect, over current protect, short-circuit protect |
| Warranty life | 12 months |
Typical applications
Vehicle GPS, vehicle camera, security monitoring, outdoor lighting, gas boilers, robot etc.
Certificates
UN38.3, MSDS, IEC62133, CB, KC, BIS, PSE, UL1642, UL2054, Reach, RoHS etc.
]]>| Battery model | 3.7V LIP403040 520mAh |
| Nominal voltage | 3.7V |
| Nominal capacity | 520mAh |
| Minimum capacity | 520mAh |
| Charging voltage | 4.2V |
| Standard charging current | 104mA (0.2C) |
| End current | 5.2mA (0.01C) |
| Max. charging current | 260mA (0.5C) |
| Standard discharging current | 104mA (0.2C) |
| Max. discharging current | 520mA (1C) |
| End voltage of discharge | 3.0V |
| Dimension of cell | 4*30*30mm |
| Charging temperature range | 0~45℃ |
| Discharging temperature range | -20~60℃ |
| Protection Circuit Module (PCM) | Overcharge protect,over-discharge protect, over current protect, short-circuit protect, temperature protect |
| Battery case | Plastic case produced via ultrasonic welding process, IP67 |
| Warranty life | 12 months |
FAQ
- Can you provide lipo battery samples with case?
Sure, normally, we produce the case samples via 3D printing process. - What’s the lead time of battery samples with case?
Normally, it’s 15~20 days - Do you have the capability to produce battery case as well for mass production?
Yes, we have many battery projects with case.
We have ultrasonic welding machines in our production line, we can produce cases via ultrasonic welding by ourselves; further, we have reliable Injection molding and CNC partners who have rich experience of DFM (design for manufacturing) and manufacturing of mechanial parts. - What kind of projects with enclosure do you have experience with?
Many! Such as heart monitor, smart watch, Adult sex toys, massage device, cosmetic instrument, power bank of security camera,robot. - Can I use my own mechanical parts supplier and consign cases to you to assemble it with the battery?
No problem, clients can ship the cases to us, and we assemble in our production line, and then ship out. - What information and document do you need for producing cases?
· STEP file of your 3D model.
· Technical drawing with all dimensions you want to have verified during quality control (including tolerance).
· Material and color you request.
· Any other comments or requirements. - Do you protect clients’ IP?
Yes, always, please feel free to send DNA to us to sign it.
Certificates
UN38.3, MSDS, IEC62133, CB, KC, BIS, PSE, UL1642, UL2054, Reach, RoHS etc.
]]>